volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Adjusting height of trim A > < Adjusting gap/shut line B

New Beetle

Adjusting gap/shut lines C and D
Adjusting gap/shut lines C and D
–  Remove side panel trim → Chapter.
   
–  Remove screws -1-.
–  Align trim module -2- in direction of -arrow-.
–  Tighten screws -1- (3 Nm).
  M70-0166
–  Check gaps/shut lines -C- and -D- are 3.5…4.5 mm and adjust if necessary.
–  Install side trim panel → Chapter.
  M70-0162

Adjusting height of trim A > < Adjusting gap/shut line B