Volkswagen New Beetle Workshop Service & Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Installing >
< Removing and installing wheel bearing/wheel hub on vehicles with disc brakes
Removing and replacing wheel bearing on vehicles with disc brakes
Running gear, axles, steering
Rear suspension, drive shaft
Repairing wheel bearing / moving_and_installing_wheel_bearing/wheel_hub_on_vehicles_with_disc_brakes/">Removing and installing wheel bearing/wheel hub on vehicles with disc brakes
Removing
Removing
Removing
–
Raise vehicle.
–
Remove wheel.
Loosen grease cap from seat by tapping lightly on the claw of the hub grease cap puller -VW 637/2-.
–
Lever off grease cap.
–
Remove securing bolts
-A-
from brake caliper.
–
Remove brake caliper and hang from body.
–
Remove cross-head screw for brake disc and remove brake disc.
–
Remove 12-point nut.
–
Pull wheel hub/wheel bearing unit off stub axle.
A -
Puller, e.g. -Kukko 20/2-
–
Pull inner bearing race off stub axle.
Use only puller
-A-
with clamp clip, e.g. -Kukko 204-2- (commercially available).
Running gear, axles, steering
Rear suspension, drive shaft
Repairing wheel bearing / moving_and_installing_wheel_bearing/wheel_hub_on_vehicles_with_disc_brakes/">Removing and installing wheel bearing/wheel hub on vehicles with disc brakes
Removing
Installing >
< Removing and installing wheel bearing/wheel hub on vehicles with disc brakes