New Beetle L4-1.8L Turbo (AWP) (2003)
Water Pump: Service and Repair
Coolant pump, removing and installing
Special tools and equipment
^
VAG1306 Drip tray
^
VAG1331 Torque wrench (5 to 50 Nm)
^
VAG1921 Spring-type clip pliers
^
Anti-freeze tester
Note:
^
Always replace seals and gaskets.
^
The lower part of the toothed belt guard need not be removed.
^
The toothed belt should be left in position on the crankshaft sprocket.
^
Cover toothed belt with a cloth to protect it from coolant before removing coolant pump.
Removing
-
Drain coolant. See: Service and Repair
-
Remove ribbed belt. See: Engine/Drive Belts, Mounts, Brackets and Accessories/Ribbed Belt/Service and Repair
-
Remove upper and center toothed belt guard. See: Engine/Timing Components/Timing Belt/Service and Repair/Procedures
-
Take toothed belt off coolant pump toothed belt sprocket.