New Beetle L4-1.8L Turbo (AWP) (2003)
WARNING!
The seat belts should be checked separately.
NOTE: When replacing either an airbag unit or the airbag control module, see your Parts Department for the proper registration procedure.
Drivers Side Airbag Unit - Assembly Overview
Drivers Side Airbag Unit - Assembly Overview
1
-
Steering wheel
-
Observe installation position when installing
2
-
Connector(s)
-
Drivers side airbag unit can have one or two connectors, one for igniter 1 and one (green and orange) for airbag units with two igniters
3
-
Socket head bolt
-
60 Nm
-
Coated with locking compound
-
May be used up to five times
-
Press in a punch indentation after each installation
4
-
Airbag unit
5
-
Catches
-
Are disengaged from the back side of the steering wheel
6
-
Securing plate
7
-
Return spring with slip ring
Driver Side Airbag Unit, Removing and Installing
Driver Side Airbag Unit, Removing And Installing
Removing