New Beetle L4-1.8L Turbo (AWP) (2003)
Subframe: Service and Repair
Subframe, Removing and Installing
Subframe, removing and installing
Special tools and equipment
^
3283 Hub puller
^
VAG1383A Engine/transmission jack
Removing
-
Lift vehicle until load on front axle is relieved.
-
Loosen right-side 12-point nut.
-
Remove wheel.
-
Remove noise insulation panel -arrows-.
WARNING:
The vehicle must be standing on its wheels when loosening or tightening the 12-point nut. Otherwise there is risk of an accident.
-
Remove left-side noise insulation -arrows-.
Vehicles with TDI engine
-
Remove intake air duct between charge air cooler and turbocharger.
Continued for all vehicles
-
Remove right-side noise insulation.
-
Mark installation position of ball joint bolts on control arm.