New Beetle L4-1.8L Turbo (AWP) (2003)
Fig. 4 Pulling off wheel bearing/hub unit
A - Puller, e.g. Kukko 20/2
Fig. 5 Pulling bearing inner race off stub axle
Only use puller with leg clamp -a- (e.g. Kukko 204-2) (commercial type)
Fig. 6 Pulling wheel bearing/hub unit onto stub axle
-
Install wheel bearing/hub unit as far as possible onto stub axle.
-
Attach 3420 assembly tool and pull wheel bearing/hub unit on up to stop.
-
Remove 3420 assembly tool.
Fig. 7 Securing wheel bearing/hub unit
-
Install new 12-point nut -A- and tighten to 175 Nm (129 ft. lbs.).
-
Install brake drum.