New Beetle L4-1.8L Turbo (AWP) (2003)
Notes:
^
Always replace dust cap.
^
Damaged (dented) dust caps allow moisture contamination, therefore always use the tool illustrated.
Installation is the reverse of removal.
Fastener/location Tightening torques
Brake caliper to rear axle .............................................................................................................................................................. 65 Nm (48 ft. lbs.)
Brake disc to wheel hub ............................................................................................................................................................... 4 Nm (35 inch lbs.)
Wheel Bearing/Hub Unit (W/Rear Drum Brakes), Remove & Install
Wheel bearing/wheel hub unit (vehicles with rear drum brakes), removing and installing
Special tools and equipment
^
VW 637/2 Grease cap puller
^
3241/4 Seal installer
^
3420 Assembly tool
^
VAG 1332 Torque wrench
^
VAG 1410 Torque wrench