New Beetle L4-1.8L Turbo (AWP) (2003)
2nd gear synchronizer ring - three recesses (arrows)
Fig. 16 Checking 2nd gear synchronizer ring for wear
-
Press synchronizer ring, outer-ring and inner-ring onto gear cone and measure gap -a- with feeler gauge.
Fig. 17 Installation position of outer ring
The lugs (arrows) face toward 1st gear -A-
Fig. 18 Checking inner ring for wear
Press inner-ring onto 2nd gear cone and measure gap -a- with feeler gauge.
Fig. 19 Installation position of synchronizer ring (inner ring) -A-