New Beetle L4-1.8L Turbo (AWV) (2005)
Hood Shock / Support: Service and Repair
Gas-filled Strut, Venting
-
Clamp gas-filled strut in vice area - x - = 50 mm (2 in.).
CAUTION: Clamping must only be done in this area, otherwise there is a risk of an accident.
-
Using saw, cut into cylindrical part of strut at point within first third of cylinders length (measured from cover edge at piston rod end of cylinder).
NOTE:
-
Always wear eye protection when performing this procedure.
-
Cover the area of the sawn-off portion with a clean rag.
-
Dispose of fluid and cleaning rag in a proper manner.