New Beetle L4-1.8L Turbo (AWV) (2005)
/Page-2581006.png)
-
Remove bolts/screws -1-.
-
Align flap module -2- in direction of -arrows-.
-
Tighten screws/bolts -1- (3 Nm).
-
Check slack -C- and -D- 3.5...4.5 mm and adjust if necessary.
-
Install side panel trim.
Adjusting trim height B
-
Remove side panel trim.
-
Remove main frame for flap module.
-
Remove bolts/screws -1-.
