New Beetle L4-1.8L Turbo (AWV) (2005)
-
Secure brake caliper housing to brake carrier with both guide pins.
-
Install both protective caps.
-
Insert retaining spring into brake caliper housing.
-
Screw brake hose onto brake caliper.
-
Remove Brake pedal depressor V.A.G 1869/2.
-
Insert brake pad wear indicator connector into retainer on suspension strut.
-
Bleed brake system.
-
Install wheel.
Note:
^
Depress brake pedal firmly several times with vehicle stationary so that the brake pads are properly seated in their normal operating position.
^
Check brake fluid level.
Torque settings
C 38
Brake caliper, removing and installing
Special tools, testers and auxiliary items required
^
Torque wrench V.A.G 1331