New Beetle L4-1.8L Turbo (AWV) (2005)
-
Install camshaft pulley (narrow web shows outward - arrows - and TDC marking is visible) and tighten securing bolt to 65 Nm (use retainer 3036).
-
Check position of camshafts to each other.
Further assembly is basically the reverse of the disassembly procedure.
-
Install toothed belt.
Note:
^
When the camshafts have been installed the engine must not be started for about 30 minutes. Hydraulic compensation elements must settle
(otherwise valves will strike pistons).