New Beetle L4-1.8L Turbo (AWV) (2005)
/Page-744002.png)
-
Remove coolant pump securing bolts - 1 - and remove coolant pump - 2 -.
Installing
Installation is performed in the reverse order. When installing, note the following:
-
Moisten new O-ring with coolant.
-
Insert coolant pump with O-ring in cylinder block and tighten securing bolts.
-
Tightening torque: 15 Nm
-
Install toothed belt and set timing.
-
Install ribbed belt.
-
Fill with coolant.
