New Beetle L4-1.8L Turbo (AWV) (2005)
Fig. 1 Separation point at exhaust pipe
Recommended special tools and equipment
-
Body saw, e.g. V.A.G1523
Work procedure
-
Separate exhaust pipe at right angle to separation point (arrow -2-).
-
Position replacement double clamp -4- in installation position at the edge markings (arrows -1- and -3-) as shown when installing.
Tightening torque 40 Nm
Fig. 2 Installation position of double clamp
Work procedure
-
Position new double clamp as shown with approx. 5 mm distance to marking A (arrow -1-) and secure it.
Tightening torque 40 Nm
NOTE:
-
Marking A (arrow -1-) applies to vehicles with manual and automatic transmission.
-
Marking S (arrow -2-) is not relevant.
Fig. 3 Installation position of muffler suspension