New Beetle L4-1.8L Turbo (AWV) (2005)
-
Align mark on camshaft pulley with mark on cylinder head cover.
-
Place toothed belt on crankshaft pulley (observe direction of rotation).
-
Install engine bracket to cylinder block.
-
Tightening torque: 45 Nm
Note:
^
Before installing, insert bolts into engine bracket.
-
Install toothed belt guard lower part (insert securing bolts with locking fluid D 000 600 A2).
-
Tightening torque: 10 Nm
-
Install vibration damper-belt pulley with a bolt.
-
Set crankshaft to TDC No. 1 cylinder.
-
Place toothed belt on coolant pump, tensioning roller and camshaft pulley.
-
Tension toothed belt
B - Toothed belt removed from camshaft pulley only