New Beetle L4-1.8L Turbo (AWV) (2005)
-
Check wires between test box and 8-pin connector to Transmission Control Module (TCM) for open circuit according to wiring diagram.
Wire resistance: max. 1.5 Ohms
-
Check wires for short circuit to each other.
Specified value: Infinite Ohms
If no malfunctions are found in wires:
-
Replace respective sender for hydraulic pressure.
-
Erase DTC memory of Transmission Control Module (TCM). Diagnostic mode 4: Reset/erase diagnostic data. See: Computers and Control
Systems/Testing and Inspection/Scan Tool Testing and Procedures/With Generic Scan Tool/Diagnostic Mode 4: Reset/Erase Diagnostic Data
-
Generate readiness code. See: Computers and Control Systems/Testing and Inspection/Monitors, Trips, Drive Cycles and Readiness Codes page
ST-83