New Beetle L4-1.8L Turbo (AWV) (2005)
Battery: Vehicle Damage Warnings
Handling Instructions
Handling Instructions
CAUTION: Before beginning repairs on the electrical system:
-
Obtain the anti-theft radio security code.
-
Switch off all electrical consumers, switch off ignition and remove ignition key.
-
Disconnect negative ( - ) battery terminal.
-
When disconnecting and reconnecting battery terminals, observe all applicable Notes and torque specifications, as well as instructions on
performing OBD program and electrical system function checks as specified.
NOTE:
-
Battery posts and terminals must no longer be greased.
-
In order to prevent damage to the battery housing, battery terminals must be placed on battery posts without using force (by hand only).
-
Battery post/terminal nut -arrow- tightening torque: 5 Nm (44 in lb)
-
Additional battery post/terminals, tightening torque: 6 Nm (53 in lb).
Batteries With Central Gas Venting
Batteries With Central Gas Venting
Batteries with two different styles of central gas venting are installed:
-
Batteries with central gas vent hose
-
Batteries without central gas vent hose
CAUTION:
-
Only new generation batteries with central gas venting are to be installed!
-
For proper function of central venting and flame trap, check vent hose (where applicable) for proper installation. Vent hose must NOT be
disconnected or pinched.
-
Only the use of genuine VW battery cell caps ensures the different battery cover systems are sealed correctly.
-
Only use genuine VW cell caps of the same construction if lost or damaged.
-
Caps must be fitted with an O-ring seal.