New Beetle L4-1.8L Turbo (AWV) (2005)
If values are outside tolerance, transverse inclination must be checked first and compensated if necessary.
Overall toe setting of rear axle is not adjustable.
Only by moving the mounting brackets is it possible to even out individual toe settings uniformly.
If measured values are still not within specified range, check axle beam for damage and replace if necessary.
Loosen all bolts of mounting bracket - 1 -.
Slide mounting bracket - 1 - laterally - arrows -.
2 - Rear axle body
Tighten bolts to 75 Nm.
Always use new bolts!
Rear Suspension
Rear axle in curb weight position