New Beetle L4-1.8L Turbo (AWV) (2005)
1. Cover
^
With symbols inlay
^
Can only be replaced complete
2. Printed circuit board
3. Frame
^
With cover strip
^
Selector mechanism and printed circuit board cover.
^
Selector mechanism frame.
Selector Mechanism and Printed Circuit Board Cover, Removing and Installing
Selector mechanism and printed circuit board cover, removing and installing, 09G, 6 Spd. A/T
Removing
-
Remove selector lever handle.
-
Move pull rod upward and shift selector lever to position "P" with pull rod still held up.
-
Switch off ignition.
-
Remove center console
-
Disconnect printed circuit board connector - 1 -.
-
Pull connector out of hole - arrow - in retainer - 2 -.