New Beetle L4-1.8L Turbo (AWV) (2005)
^
Observe allocation
9. Bolt, 11 Nm
^
Qty. 3
^
For securing oil strainer to valve body
10. Oil strainer
11. Automatic transmission hydraulic pressure sensor 1 -G193-
^
From July 2004 no longer installed
12. Automatic transmission hydraulic pressure sensor 2 -G194-
^
From July 2004 no longer installed
13. Valve body
^
Identification of solenoid valves
14. Bolt, 7 Nm
15. Bolt, 6 Nm
16. Transmission input speed (RPM) sensor -G182-
17. Bolt, 7 Nm
18. Transmission output speed (RPM) sensor -G195-
19. Transmission housing
20. Breather cap
21. ATF cooler
22. Multi-function Transmission Range (TR) switch -F125-
23. Transmission fluid temperature sensor -G93-
24. Bolt, 6 Nm
25. Wiring harness with 8-pin connector
^
With O-ring on connector, always replace O-ring
^
With Transmission fluid temperature sensor -G93-
^
For Transmission input speed (RPM) sensor -G182-
^
For Transmission output speed (RPM) sensor -G195-
^
For Automatic transmission hydraulic pressure sensor 1 -G193- and Automatic transmission hydraulic pressure sensor 2.
^
G194- (only installed to 06.04)
^
Location of sensors
26. Oil seal
^
Always replace
27. ATF drain plug, 40 Nm
28. Selector lever
^
For gear selector rod
29. Washer
30. Nut, 10 Nm
^
Observe installation position of nuts
31. Large spring
32. Small spring
33. Damper piston
34. Wiring harness with 14-pin connector
^
With O-ring on connector, always replace O-ring
^
For solenoid valves
^
Location of solenoid valves and routing of wiring harnesses
35. Bolt, 6 Nm
Identification of solenoid valves