New Beetle L4-1.8L Turbo (AWV) (2005)
T10111 Retaining clamp
Removing
-
Remove driver's side lower cover
-
Install retaining clamp T10111 into over-center spring from the right side.
-
Make sure that the retaining clamp is placed correctly on the over-center spring:
1 - The retaining clamp claws have to contact with the over-center spring rear part exactly over the segment -1-.
2- Press the clutch pedal lightly in direction of bulkhead.
-
Install the retaining clamp lug -2- in the recesses of the over-center spring.
-
Now press the clutch pedal to the bulkhead until the over-center spring can be removed from the mounting bracket mountings and the clutch pedal.
-
Bring clutch pedal to rest position.
-
Turn over-center spring with the retaining clamp T10111 in direction of arrow -A- and remove downward in direction of arrow -B- when doing
this.
Installing
-
Pull clutch pedal into passenger compartment.