New Beetle L4-1.8L Turbo (AWV) (2005)
/Page-1591002.png)
-
Pull out seal for flange shaft with VW 771 and VW 771/37.
Note: Do not damage sleeve, otherwise leaks will occur.
-
Replace sleeve if damaged.
Installing
-
Drive new seal into sleeve onto stop, when doing this do not cant seal.
-
Fill space between sealing lip and dust lip with sealing grease G052 128 A1.
-
Insert flange shaft.
-
Install flange shaft with cone head bolt and tighten to prescribed torque
-
Install drive shafts to transmission.
-
Top off transmission oil.
-
Install sound insulation trays.
Right Flange Shaft Oil Seal, Removing
Right flange shaft oil seal, removing, 02J, 5 Spd. M/T
