New Beetle L4-1.8L Turbo (AWV) (2005)
/Page-3232002.png)
-
Place 24 mm open end wrench -1- on setting device and adjust wiper arm -2- to specification -arrows-.
-
Release wiper arm -2- from setting device and then re-secure with locking screw -3-.
-
Compare value set with table. Repeat adjustment and check sequence until specifications are achieved.
-
Remove setting device and install wiper blade.
-
Wiper arm tightening torque: 20 Nm (15 ft lb)
-
Check that wiper system operates without skipping.
