New Beetle L4-1.8L Turbo (BNU) (2005)
Headliner: Service and Repair
Roof Trim
Molded Headliner, Removing And Installing
CAUTION: Before working on electrical system: Disconnect battery Ground (GND) strap
NOTE: Slight changes may have to be made to removal and installation procedures, depending upon equipment installed in vehicle.
Removing
-
Switch ignition off.
-
Remove upper A-pillars trim.
-
Remove door inner seals at top.
-
Pry out make-up lighting using screwdriver and disconnect harness connectors.
-
Unhook sun visor - 1 - out of mount - 2 -.
-
Pry off cap - 6 -.
-
Remove bolt - 5 -.
-
Remove sun visor mount - 4 - from mounting and disconnect harness connector - 3 -.
-
Pry off cap - 7 -.
-
Remove bolts - 8 - and remove mounts - 2 -.