New Beetle L4-1.8L Turbo (BNU) (2005)
Convertible Top Reservoir: Service and Repair
Oil Reservoir, Removing and Installing
Oil Reservoir, Removing and Installing
Removing
CAUTION: Place a container under pump to collect oil leaking out, before disassembling reservoir.
-
To disassemble, loosen Torx screws - 1 - and collect oil that runs out.
-
Remove Torx screws - 1 - and remove oil reservoir carefully.
Installing
-
Moisten O-ring - 3 - with hydraulic oil G 002 000 or equivalent and insert into pump housing groove.
-
Moisten inside of oil reservoir, in area of O-ring with hydraulic oil.
-
To assemble, slide oil reservoir on with a turning motion and tighten using new Torx screws - 1 -. (2 Nm).
CAUTION: Always torque reservoir bolts to specification, otherwise oil reservoir will be damaged.
-
Install hydraulic pump.
-
Fill hydraulic system and bleed.