New Beetle L4-1.8L Turbo (BNU) (2005)
/Page-1580001.png)
Brake Master Cylinder: Locations
ABS Mark 60
Brake master cylinder/brake booster for vehicles with ABS/EDL/ASR/ESP Mark 60 from 10.00, assembly overview
Note:
^
The complete brake master cylinder and brake booster can be replaced independently of each other.
Brake master cylinder/brake booster for vehicles with ABS/EDL/ASR/ESP Mark 60 from 10.00, assembly overview
1 - Brake booster, left-hand drive
^
For gasoline engines, the vacuum required is taken from the intake manifold.
^
In vehicles with a gasoline engine and an automatic transmission, the Brake System Vacuum Pump V192 is installed.
^
On Diesel engines a vacuum pump is installed to create the required vacuum.
Functional check
^
With engine switched off, depress brake pedal firmly several times (this removes the vacuum that is in the system).
^
Now depress the brake pedal with medium force and hold in this position and start the engine. If the booster unit is working properly, the pedal
will be felt to give slightly under foot (booster assistance becomes effective).
^
If faulty replace complete.
^
Non-return valve (in vacuum hose)
Functional check
^
Brake assist in brake booster
Functional check
^
Check function of brake assist in brake booster; from 12.01
2 - Filler cap
3 - Brake fluid reservoir, left-hand drive
4 - Sealing plugs
^
Moisten with brake fluid and install into brake fluid reservoir
5 - Retaining pin
^
Insert through brake master cylinder
