New Beetle L4-1.8L Turbo (BNU) (2005)
/Page-620008.png)
Checking cylinder bores
Special tools, testers and auxiliary items required
^
Internal dial gauge 50100 mm
-
Take measurements at 3 positions in both lateral - A - and longitudinal - B - planes, as illustrated.
-
Deviation from nominal dimension max. 0.10 mm.
Note:
^
Measurement of the cylinder bores must not be done when the cylinder block is mounted on a repair stand with holding fixture VW 540 and
spacers VW 540/1 B.
