New Beetle L4-1.8L Turbo (BNU) (2005)
3. Hex socket bolt
-
Where applicable
-
M10X70
-
45 Nm (33 ft.lb)
-
Observe installation sequence See Fig. 1.
4. Hex socket bolt
-
M10X45
-
45 Nm (33 ft.lb)
-
Observe installation sequence See Fig. 1.
5. Hex socket bolt
-
Only with bracket version -A- where applicable See Fig. 2.
-
M10X45
-
45 Nm (33 ft.lb)
-
Observe installation sequence See Fig. 1.
6. Bushing
-
Only with bracket version -A- where applicable See Fig. 2.
7. Compressor
-
Sanden SD7-V16
-
With A/C clutch -N25-
-
A/C clutch -N25-, servicing
8. Hex head bolt
-
M10X112
-
45 Nm (33 ft. lb)
Fig. 1 Bracket mounting bolts, installation sequence
When installing bracket, proceed as follows:
-
Locate bracket on engine block.
-
First install bolts -1- and -2- hand tight (allows slight repositioning of bracket for other bolts if necessary)
-
Then install remaining bolts -3-, -4-, -5- and -6- in order as illustrated.
-
Torque all bolts to 45 Nm.
Fig. 2 Bracket versions