New Beetle L4-1.8L Turbo (BNU) (2005)
Transmission Position Switch/Sensor: Service and Repair
Multi-function TR switch -F125-, removing and installing, adjusting, 09G, 6 Spd. A/T
Special tools, testers and auxiliary items required
Setting gauge T10173
Torque wrench V.A.G1331
Removing
-
Move selector lever to position "N".
-
Switch off ignition.
-
Disconnect intake hose - 1 - and connector - 2 - from mass air flow sensor.
-
Disconnect secondary air injection pump hose - 3 - from air cleaner housing.
-
Remove bolts - 4 -, - 5 - and - 6 -.
-
Remove air cleaner complete.
-
Press selector lever cable - 1 - off selector shaft lever - 4 - with a 10 mm open end wrench - 3 -.