New Beetle L4-1.8L Turbo (BNU) (2005)
-
Press locking devices on selector lever cable support mounting together - arrows - and pull selector lever cable out of transmission support
mounting.
-
Disconnect connector - 2 - from Multi-function TR switch -F125-.
-
Remove nut - 1 -.
-
Pull spring ring - 2 - and lever - 3 - off selector shaft lever - 4 -.
-
Bend back hooks of locking plate - 2 - with a screwdriver.
Note: If one or more hooks of the locking plate break off while bending, replace the locking plate.
-
Remove nut - 1 -.
-
Remove bolt - 5 -.
-
Pull multi-function TR switch - 4 - along with locking plate - 2 - and washer - 3 - off selector shaft - 6 -.
Installing
Installation is performed in the reverse sequence of removal. In the process, note the following: