New Beetle L4-1.8L Turbo (BNU) (2005)
Air Bag Control Module: Removal and Replacement
Airbag Control Module J234, Removing And Installing
Removing
CAUTION: Observe safety precautions for working on airbags
-
Switch ignition off.
-
Open doors.
-
Disconnect battery Ground (GND) strap
-
Remove center console.
-
Remove tunnel support cover.
-
Press retaining tab - 4 -, swing bracket - 5 - - arrow - and pull harness connector - 3 off control module - 1 -.
-
Remove nuts - 2 - and pull control module from studs (nut - 2 - = 6 Nm).
Installing
-
Installation is performed in the reverse order of removal.
CAUTION: Make sure no one is in the vehicle.
-
Close doors.
-
Connect battery ground (GND) strap
-
Switch ignition on after installing all components.