New Beetle L4-1.8L Turbo (BNU) (2005)
Wheel Speed Sensor: Locations
ABS Mark 60
Electrical/electronic components and installing locations
13- Right/left rear ABS wheel speed sensor -G44-/-G46
^
Checked by OBD
^
Before inserting the sensor clean the inner surface of the sensor mounting and coat with lubricating paste G 000 650
^
When connecting the speed sensor wire make sure it is not twisted in the wheel housing
^
Tightening torque of bolt: 10 Nm (7.4 ft lb)
15- Wheel hub with rotor for speed sensors
^
Rotor and speed sensors for rear left and right-hand sides are identical
16- Wheel hub with rotor for speed sensors
^
Rotor and speed senders for front left and right-hand sides are identical
17- Right/left front ABS wheel speed sensor -G45-G47
^
Checked by OBD
^
Before inserting the sensor clean the inner surface of the sensor mounting and coat with lubricating paste G 000 650
^
When connecting the speed sensor wire make sure it is not twisted in the wheel housing
^
Tightening torque of bolt: 10 Nm (7.4 ft lb)