New Beetle L4-1.8L Turbo (BNU) (2005)
Seat Occupant Sensor: Service and Repair
Passive Occupant Detect System (PODS), Removing and Installing
Passive Occupant Detection System (PODS), Removing And Installing (USA)
NOTE:
-
When removing Passive Occupant Detection System PODS), all wires disconnected must be reconnected correctly when installing.
-
Before beginning work on Passive Occupant Detection System (PODS), note how all wires are connected and routed.
Removing
-
Switch ignition off.
-
Disconnect battery ground (GND) strap
-
Remove driver/passenger seat (use Airbag adapter VAS 5094 ).
-
Remove bolt on inside of seat - arrow -.
-
Remove plastic rivet -1 - at front part of seat.
-
Loosen plastic cover - 2 - by unhooking at lower part of seat - 3 -.
-
Remove bolt - arrow -.