New Beetle L4-1.8L Turbo (BNU) (2005)
-
Remove bolts -arrows- and remove battery carrier.
When installing tighten bolts to 6 Nm.
-
Separate electrical connection -1- and remove from retainer
-
Disconnect electrical connection at terminal 50 connector -2-.
-
Remove nut from solenoid terminal 30 wire -3- and remove cable.
When installing tighten terminal nut to 13 Nm.
-
Remove wiring from wiring guides.
-
Remove wiring guides.
-
Remove coolant hose retainer -1-.
-
Remove threaded studs -arrows-.
-
Pull starter from transmission housing and remove.
Installing
Install in reverse order of removal, note all tightening torques specified in removal procedure.