New Beetle L4-1.8L Turbo (BNU) (2005)
1. Drive axle
^
Pressing drive axle out and in from wheel hub
2. ABS wheel speed sensor
3. Socket head bolt
^
M6 x 16
4. Suspension strut
5. Hex bolt
^
Always replace after removal
^
Hex bolt point must face in direction of travel
6. Tie rod end
7. Self-locking nut
^
M12 X 15
^
Tightening torque
^
Never less than 90°!
^
Torque angle tolerance 90° to 120°
^
Always replace
8. Self-locking nut
^
Always replace
9. Wheel bearing housing
^
For vehicles:
^
With gasoline engine up to and including 85 kW
^
With TDI-engine
10. Ball joint
11. Self-locking nut