New Beetle L4-1.8L Turbo (BNU) (2005)
VAG 1331 Torque wrench
VAG 1275 Pliers
Selector Mechanism, Removing and Installing
Selector mechanism, removing and installing, 02J, 5 Spd. M/T
Removing
-
Obtain radio code on vehicles with coded radio.
-
With ignition switched off disconnect battery ground strap.
-
Pull intake hose -1- and connector -2- off Mass air flow sensor.
-
Remove bolts -3-, -4- and -5-.
-
Remove air cleaner complete.
-
Pry gate selector cable -A- and gear selector cable -B- off transmission using an open wrench.
-
1 = 13 mm open wrench, commercially available