New Beetle L4-1.9L DSL Turbo (ALH) (2003)
-
Remove two cable guides -A- and -B- from short lower cable -1-
NOTE:
-
If lower cable guides (-A- & -B-) on vehicle were previously inspected and found worn or damaged, then the short lower cable on new slider
does not have to be untied
-
Install new guides on cable.(See Section D - Additional Repair Information)
-
Rotate cable guide -B- to a position that is forward of it s securing rivet
-
Insert untied short lower cable down through cable guide -B- then through cable guide -A-