New Beetle L4-1.9L DSL Turbo (ALH) (2003)
Front Crankshaft Seal: Service and Repair
Sealing ring (crankshaft pulley side), replacing
Special tools and equipment
^
2080A sleeve
^
3415 Counter support
^
3203 Seal remover
^
3265 Sleeve installer
^
VAG1331 Torque wrench: 5 to 50 Nm (3 7 to 37 ft. lbs.)
^
VAG1332 Torque wrench: 40 to 200 Nm (30 to 148 ft. lbs.)
Removing
-
Remove ribbed belt.
-
Remove toothed belt.
-
Remove crankshaft toothed belt sprocket by counterholding sprocket using 3415.
-
To guide seal extractor, hand screw center bolt into crankshaft onto stop.