New Beetle L4-1.9L DSL Turbo (BEW) (2006)
‹› If damaged, replace the cylinder head cover seal and the bolt seals.
-
Clean the sealing surfaces thoroughly with a clean cloth.
-
Place a drop of sealant (AMV 174 004 01 ) (dia. approximately 5 mm) on both edges on the sealing surfaces of the front bearing cover/cylinder
head- arrows -.
-
Place a drop of sealant (AMV 174 004 01 ) (dia. approximately 5 mm) on both edges on the sealing surfaces of the rear bearing cover/cylinder
head- arrows -.
-
Install the cylinder head cover.
-
Hand-tighten the cylinder head cover bolts in the sequence - 1 to 13 -.