New Beetle L4-1.9L DSL Turbo (BEW) (2006)
/Page-820008.png)
‹› In the illustration, the camshaft-toothed belt sprocket is shown without the toothed belt.
-
Lock the hub with the rig pin ( 3359). To do this, push the rig pin through the left-sided empty slot in the bore of the cylinder head.
-
Also, lock the toothed belt crankshaft sprocket with the crankshaft stop (T10050). Push the crankshaft stop from the front side of the toothed belt
sprocket into the teeth.
‹› The marking on the toothed belt sprocket-crankshaft - 2 - and on the crankshaft stop - 1 - must align. The pin on the crankshaft stop must engage in
the hole on the sealing flange.
-
Mark rotational direction of toothed belt.
With Hydraulic Tensioning System
Identification:
