New Beetle L4-1.9L DSL Turbo (BEW) (2006)
Water Pump: Service and Repair
Coolant Pump
Special tools, testers and auxiliary items required
‹› Refractometer (T10007)
‹› Drip tray (V.A.G 1306) or ( VAS 6208)
‹› Torque wrench (V.A.G 1331)
‹› Spring type clip pliers (VAS 5024 ) or spring type clip pliers (VAS 5024A )
Removing
‹› Always replace gaskets and seals.
-
Drain coolant => [ Cooling System, Draining and Filling ] See: Cooling System/Service and Repair/Procedures/Cooling System, Draining and
Filling.
-
Toothed belt, removing => [ Toothed Belt ] See: Timing Components/Timing Belt/Service and Repair/Removal and Replacement/Toothed Belt.
-
Remove the mounting bolts - 1 - for the coolant pump - 2 - and carefully remove the coolant pump.
Installing
Installation is performed in the reverse order of removal, noting the following:
-
Clean and/or smooth O-ring sealing surface.
-
Lubricate new O-ring - 3 - with coolant.