New Beetle L4-1.9L DSL Turbo (BEW) (2006)
Do not tighten bolts completely. It will be easier to attach the various brake lines to the hydraulic unit.
-
Tighten hydraulic unit after tightening brake lines.
-
Rest of installation is in reverse order of removal.
-
Remove brake pedal actuator (V.A.G 1869/2 ).
-
Bleed brake system => [ Brake System Bleeding General Information ] See: Brakes and Traction Control/Brake Bleeding/Service and
Repair/Brake System Bleeding General Information.
-
Code radio.
-
Code control module.