New Beetle L4-1.9L DSL Turbo (BEW) (2006)
Parking Assist Distance Sensor: Service and Repair
Parking Aid
Rear Parking Aid Sensors
Special tools, testers and auxiliary items required
‹› Release Tool (T10345)
Sensor in the rear bumper cover:
‹› Left Rear Center Parking Aid Sensor (G204)
‹› Left Rear Inner Parking Aid Sensor (G334)
‹› Right Rear Inner Parking Aid Sensor (G335)
‹› Right Rear Center Parking Aid Sensor (G205)
Removal and installation is the same for all sensors so the following information describes only one of them.
CAUTION!
‹› Turn off the ignition and all electrical components.
‹› Remove the key.
Removing
-
Remove rear bumper cover.
CAUTION!
‹› Always follow the sensor removal sequence.
‹› Otherwise, the sensor may be damaged. Hairline cracks which lead to sensor failure can develop if too much force is used on the
sensor.
‹› First remove the sensor from the bracket and then disconnect the sensor connectors.
-
Disengage retaining tabs - arrows - with Release Tool (T10345) and remove sensor with connector connected from bumper cover.