New Beetle L4-1.9L DSL Turbo (BEW) (2006)
-
Check wires between test box and connector for open circuit according to wiring diagram.
Terminal 3 + socket 62
Terminal 4 + socket 78
Wire resistance: max. 1.5 ohms
-
Check wires for short circuit to B+ and to Ground (GND).
Specified value: infinity ohms
If no malfunctions are found in wires:
-
Replace Charge Air Pressure Sensor -G31-, item 16 overview of component locations.
-
Erase DTC memory of control module for Diesel-Direct fuel injection system, Diagnostic mode 4: Reset/erase diagnostic data. See: Powertrain
Management/Computers and Control Systems/Testing and Inspection/Scan Tool Testing and Procedures/Diagnostic Mode 04 - Erase DTC
Memory
-
Generate readiness code.