New Beetle L4-1.9L DSL Turbo (BEW) (2006)
Alternator Pulley: Service and Repair
Ribbed Belt Pulley on Generator C
CAUTION!
Disconnect the battery (A) before working on the electrical system. Refer to => [ Battery A, Disconnecting and Connecting ] See:
Battery/Service and Repair/Procedures/Battery A, Disconnecting and Connecting.
Ribbed Belt Pulley without Freewheel
Special tools, testers and auxiliary items required
‹› Torque Wrench (VAG 1332)
‹› Socket wrench (3310)
Removing
-
Remove the Generator (C) first.
-
Clamp the Generator (C) in a vise.
-
Use the (VAS 3310) to remove the ribbed belt pulley nut from the generator shaft.
Installing
Install in reverse order of removal, noting the following:
Tightening specification for the nut on the ribbed belt pulley: 65 Nm.
Ribbed Belt Pulley With Freewheel
Special tools, testers and auxiliary items required
‹› Torque Wrench (VAG 1332)