New Beetle L4-1.9L DSL Turbo (BEW) (2006)
Wiring Harness: Procedures
Safety Precautions
Wiring Harnesses and Connectors, Repairing
Safety Precautions
CAUTION!
When performing repairs on airbag and seat belt tensioner wiring harness, use only terminals, connectors and wires designated for it.
CAUTION!
Be sure to read the information regarding repairing the wiring harnesses for the airbag and pretensioner.
Observe country-specific regulations.
Pay attention to decals designating high voltage components. When performing repairs, residual voltage must be discharged.
The wiring harnesses for the airbag and the pretensioner may be repaired only with the (VAS 1978 B). Refer to => [ Airbag and Belt
Tensioner Wires, Repairing ]. See: Wiring Harnesses and Connectors, Repairing/Airbag and Belt Tensioner Wires, Repairing
Refer to => User's instructions of (VAS 1978 B)
Vehicle Electrical System Repair Information
Wiring Harnesses and Connectors, Repairing
Safety Precautions
CAUTION!
When performing repairs on airbag and seat belt tensioner wiring harness, use only terminals, connectors and wires designated for it.
CAUTION!
Be sure to read the information regarding repairing the wiring harnesses for the airbag and pretensioner.
Observe country-specific regulations.
Pay attention to decals designating high voltage components. When performing repairs, residual voltage must be discharged.
The wiring harnesses for the airbag and the pretensioner may be repaired only with the (VAS 1978 B). Refer to => [ Airbag and Belt
Tensioner Wires, Repairing ]. See: Wiring Harnesses and Connectors, Repairing/Airbag and Belt Tensioner Wires, Repairing
Refer to User's instructions of (VAS 1978 B)
Vehicle Electrical System Repair Information
CAUTION!
Risk of injury.
‹› Pay attention to decals designating high voltage components. When performing repairs, residual voltage must be discharged.
‹› Some tools are supplied with a tool safety clip, which is slid over the tool points after using the tool, in order to protect other workers
from injuries and tool points from damage.
CAUTION!
When disconnecting and connecting the Battery ( A), the procedure must be followed as described in the Repair Information. Refer to =>
[ Battery A, Disconnecting and Connecting ] See: Battery/Service and Repair/Procedures/Battery A, Disconnecting and Connecting.
CAUTION!
‹› Observe the country-specific requirements.
‹› By disconnecting battery ground (GND) wire, safe work on vehicle electrical system is guaranteed. Turn off the ignition and
disconnect the ground cable from the Battery (A). Refer to => [ Battery A, Disconnecting and Connecting ] See: Battery/Service and
Repair/Procedures/Battery A, Disconnecting and Connecting.