New Beetle L4-1.9L DSL Turbo (BEW) (2006)
15
Clamp with rubber bushing
‹› Replace weld nut if there is damage in thread
16
Heat shield
17
Self-locking hex nut
‹› M12 x 1.5
‹› Tightening specification => [ Steering Gear ] See: Specifications.
18
Hex nut
‹› M8
‹› Tightening specification => [ Steering Gear ] See: Specifications.
Power Steering Gear
Power Steering Gear
Special tools, testers and auxiliary items required
‹› Hose clamps up to 25 mm dia. (3094)
‹› Torque wrench (V.A.G 1331)
‹› Torque wrench (V.A.G 1332)
‹› Engine/transmission jack (V.A.G 1383 A) with universal transmission support (V.A.G 1359/2)
Notes for repair work on power steering gear
‹› All work on the power steering must be carried out with utmost cleanliness.
‹› Thoroughly clean all connections and the surrounding area before disconnecting.
‹› If repairs will not be carried out immediately, place removed parts onto a clean surface and cover.
‹› Only use lint-free cloths.
‹› Only unpack replacement parts immediately prior to installation.
‹› Only use parts in their original packing.
Removing
-
Remove bolts - 1 -.