New Beetle L4-1.9L DSL Turbo (BEW) (2006)
Shift Interlock Solenoid: Service and Repair
Shift Lock Solenoid
Removing
-
Remove selector mechanism => [ Shift Mechanism ] See: Shifter A/T/Service and Repair/Removal and Replacement/Shift Mechanism.
-
Disconnect connector - 1 - from Shift Lock Solenoid (N110).
-
Press retaining strap - arrow - downward using a screwdriver and simultaneously rotate magnets in direction of - arrow -.
-
Pull out Shift Lock Solenoid.
Installing
Installation is in reverse order of removal, note the following:
-
Install selector mechanism => [ Shift Mechanism ] See: Shifter A/T/Service and Repair/Removal and Replacement/Shift Mechanism.
-
Check shift mechanism => [ Shift Mechanism, Checking ] See: Shifter A/T/Service and Repair/Procedures.