New Beetle L4-2.0L (AVH) (2005)
-
Remove bolts - 1 - and remove wiring harness support - 2 -.
-
Install in reverse order of removal.
NOTE: Replace clips for wiring harness.
Carrier With Micro Switch For Rear Lid, Removing and Installing (Convertible)
Carrier With Micro Switch For Rear Lid, Removing and Installing (Convertible)
Removing
-
Removing tailgate trim.
-
Unclip pull rods - 4 - and - 6 - (USA).
-
Disconnect connector - 17 -.
-
Disconnect micro switch connector - 12 - and unclip connector from retaining plate.
-
Remove bolts - 11 -.
-
Remove retaining plate - 15 -.
-
Remove carrier with micro switch
Installing