New Beetle L4-2.0L (AVH) (2005)
-
Check slack -C- and -D- 3.5...4.5 mm and adjust if necessary.
-
Install side panel trim.
Adjusting trim height A
-
Remove side panel trim.
-
Unclip push rod -1- off lever -4-.
-
Remove nut -2-.
-
Rotate ball socket -3-.
Length of push rod is changed by rotating ball socket -3- on push rod. This in turn adjusts trim height.
-
Tighten nut -2-.
-
Clip push rod -1- on to lever -4-.
-
Check trim height -A- and adjust if necessary.
-
Install side panel trim.
Adjusting trim height B
-
Remove side panel trim.
-
Remove main frame for flap module.